How To Change Batteries In Toyota Key Fob

To change the concoction in this Toyota fundamental, you volition need a CR2025 battery. This key is used between 2008 and 2012 in models such as Toyota Rav4 and Avalon.

Show Instructions,

Instructions

Locate the slot on the side of the keyfob. Insert a flat screwdriver and twist it to separate the central housing.
Remove the housing from inside the primal shell. Y'all will run into the battery housing that you need to open up.
Utilise a screwdriver to pop out the back cover. You volition need to push button within all the 5 tabs. They just need to be pushed in slightly to allow the black plastic to release.
Remove the dorsum cover. Slide out the old bombardment. Install new CR2025 iii volt lithium bombardment.
Install the battery shell in contrary order. If the buttons of this remote are worn out you lot can replace the buttons while you lot are at it or even the whole case. A new shell for this remote tin can be purchased on Amazon, click here to see new shells for this Toyota remote.

To alter the battery in this Toyota key fox, y'all will need one CR2016 battery.

Evidence Instructionsbattery

Use a flat head screwdriver to pry apart the 2 halves of the remote.
Use a small screwdriver to pry out the bombardment from the excursion board. Information technology is non necessary to remove the excursion board from the remote.
Press the new batter in the battery slot. Align the two halves and press them until they are locked together.

This Toyota key fob requires a CR2032 battery.

Bear witness applicable models

Camry, Corolla, Starlet, Yaris, Prius, Matrix, Corona, Caldina, Avensis, Avalon, Crown, Celica, MR2, Yaris Ractis, Verso, Previa, Sienna, RAV4, 4Runner, FJ Cruiser, State Cruiser, Sequoia, Highlander, Venza, Hilux, Tacoma, Tundra,